Hindustan Thermostatics
Hindustan Thermostatics
Industrial Area Phase 2, Ambala, Haryana
GST No. 06AAAFH5317D1ZX
TrustSEAL Verified
Call 0804604262090% Response Rate
SEND EMAIL

Bulk Milk Cooler

Prominent & Leading Manufacturer from Ambala, we offer bulk milk cooler 5000 litre, bulk milk cooler bmc 100 ltr, bulk milk cooler bmc 200 ltr, bulk milk cooler bmc 1000 ltr, bulk milk cooler bmc (vertical) 500 ltr and bulk milk cooler bmc 2000 ltr.

Bulk Milk Cooler 5000 Litre

Bulk Milk Cooler 5000 Litre
  • Bulk Milk Cooler 5000 Litre
  • Bulk Milk Cooler 5000 Litre
  • Bulk Milk Cooler 5000 Litre
  • Bulk Milk Cooler 5000 Litre
  • Bulk Milk Cooler 5000 Litre
  • Bulk Milk Cooler 5000 Litre
Get Best Quote
Approx. Price: Rs 6.4 Lakh / PieceGet Latest Price
Product Brochure

Product Details:

CapacityUp to 250 litres
Storage MaterialMilk
Tank OrientationHorizontal
Steel GradeSS304
MaterialStainless Steel
Material GradeSS 304
BrandHT
RPM of the Agitator (s) Approx.25-28 RPM
Number of AgitatorOne
Connected LoadWatts / Amps
The thickness of outer shells1.5 mm
Model of CompressorCR - 72 x 2
Power SupplyThree Phase
Type of InsulationBy injection in situ of High Density 40 kg/cu.m, CFC free PUF without any imperfection and hygroscop
CondenserAir Cooled, Finned Tube Type
Compressor2 x 5 Ton / 10.8 Amps
No. of CompressorTwo
Agitator120 Watts / 0.4 Amp
Gross Capacity5500
Thermostatics Expansion Valve CapacityORIFICE-5
Size (Nominal HP) of Compressor2 x 6.0 HP
Thermostatics Expansion Valve MakeDANFOSS / ALCO
Condenser Fan180.0.4 Amps x 4
The material used for constructionAISI304
No. of FansFour
Thermostatics Expansion ValveDANFOSS TEX-2T WITH EQUALISER
Shape & OrientationEnclosed Type Circular Shape with Top Manhole
Thickness of insulation50 mm in walls & 90 mm above evaporator
Size of Condenser24" x 42" - 4 Row
The thickness of inner shells2.0 mm
CIP FacilityCIP with Spray Ball
Type of RefrigerantFreon-R 22 / Eco Friendly
Make of CondenserLLOYD/COIL INDIA
Size & Capacity of Receiver8 L
Thermostatics Expansion Valve Size1/4 / 3/8
Type of CompressorHermetically sealed reciprocating
Make of CompressorEmerson Copeland

Bulk Milk Cooler 5000 Ltrs capacity Enclosed Type design with automatic cooling control unit with digital display control panel has rounded internal corners to facilitate thorough cleaning tank insulation is provided by factory injected polyurethane foam of 50 mm. The Integral Condensing Units is Hermetic Type with R22 Refrigerant.

  • Low Running Cost High
  • Standard of Milk Hygiene
  • Reduced Electricity Consumption
  • The Agitator on/off switch
  • Cooling on/off switch
  • Digital Temperature Display
  • Condensing Unit Hermetic 380-440 volts three phase 50 Hz power supply
  • Design and fabricated by Stainless Steel SS 304 Double
  • Condensing Unit Hermetic Type 
FUNCTION
The Bulk Cooling Units will be used to cool raw milk at the village level milk collection centre from the ambient temperature to 4° C within the specified time as laid down by ISO 5708 Class 2A-II Standards.
Two Milking Design System has been configured such that the volume of each milking is as under

Milking in the Morning : 50% (2500 Ltrs)
Milking in the Evening : 50% (2500 Ltrs)

Please note minimum milk should be 1250 Ltrs for proper functioning of BMC.

DESIGN PARAMETER
The ambient temperature to be considered for design shall be 38° C and safe operating temperature shall be 43° C

MAXIMUM COOLING TIME
First Milking : 3 hr. from 35° C to 4°C
Second Milking : 1.5 hr. from 10° C to 4°C 

A) MILK COOLING TANK
Open design with spring assisted hinged lid to be provided for easy access for cleaning and visual inspection. The tank will be a cylindrical shape with a condensing unit underneath with a double stainless steel shell of AISI 304 in special ground finish 150 grit. The bottom of the tank is designed with a dimple evaporator. It is to be made from AISI 304 Stainless Steel using laser welding technology. The thickness of the inner shell be 2 mm and the outer shell shall be 1.5 mm

INSULATION
The tank is insulated with CFC Free injected polyurethane foam min 40 kg/m3 without any imperfection or hygroscopicity with a thickness of 50mm.

THE EFFICIENCY OF THE INSULATION
Milk at 4° C shall not exceed 1° C in 24 hours when the rated volume is allowed to stand as per ISO 5708 2A-II at 50° ambient.

ACCESSORIES

AGITATOR
Extra low-speed agitator with stainless steel shaft SS sleeved up to the drive, which is geared motor will be provided for optimum sealing between agitator and tank.

OUTLET
1 unit tank outlet fitted with 1 unit Butterfly valve

B) REFRIGERATION SYSTEM
Mounted on a skid comprising of the following: Hermetically sealed compressor complete with drive motor

CONDENSER -
Air Cooled, screen-protected compact condenser unit comprising of finned condenser coils in several rows. Condenser fans of reputed make are fitted for the duty. One set of evaporating coils was welded to the inside tank and pressed into a channelling plate of adequate size.

REFRIGERANT & OIL -
The unit is supplied complete with the first charge of the environment-friendly refrigerant and lubrication oil.

ONE SET -
Refrigeration system controls field mounted comprising of a solenoid valve, L.P / H.P. cutout and sensor for digital temperature indicators.

C) CONTROL PANEL
Refrigeration control panel with milk tank control panel shall be fabricated of 1.2 mm thick mild steel sheet in dust and vermin proof design will have temperature Display & control, switch gears etc. The control panel is given in mounted execution and is pre-wired to terminal connections.
Request
Callback
Yes! I am Interested

Bulk Milk Cooler BMC 100 Ltr

Bulk Milk Cooler BMC 100 Ltr
  • Bulk Milk Cooler BMC 100 Ltr
  • Bulk Milk Cooler BMC 100 Ltr
  • Bulk Milk Cooler BMC 100 Ltr
  • Bulk Milk Cooler BMC 100 Ltr
Get Best Quote
Approx. Price: Rs 1.1 Lakh / PieceGet Latest Price
Product Brochure

Product Details:

Storage MaterialMilk
Tank OrientationVertcal
MaterialStainless Steel
Steel GradeSS304
BrandHT
Frequency50 Hz
PowerSingle-Phase 220 Volts
Orientation TypeCylindrical
ShapeVertical
Compressor1.0 Ton / 1.0 KW
Make of CompressorEmerson Copeland
Model of CompressorKCJ 511
Gross Capacity110 - 120 Litre
Thickness of Insulation50 - 60 mm Puff Insulated
MakeHindustan Thermostatics
CondenserAir - Cooled
Agitator Power60 watts
Country of OriginMade in India

  • Capacity – 100 Litres
  • Technology – Direct expansion cooling tank (Open type round shape)
  • Insulation – Factory injected polyurethane foam of 50mm.
  • Condensing unit – Hermetically sealed type with R22/R404 refrigerant gas.

FUNCTION: The Bulk Cooling Unit will be used to cool raw milk from the ambient temperature of 35 deg. to 4 deg. C within the specified time as laid down by us ISO 5708 Class 2A-II Standards. Two Milking design system has been configured such that volume of each milking is as under :

  • Milking in the Morning – 50%
  • Milking in the Evening – 50%

Maximum Cooling Time :

  • First Milking : 3.0 hr. from 35 Deg. to 4 Deg. Celsius
  • Second Milking : 1.5 hr. from 10 Deg. to 4 Deg. Celsius
A) Milk Cooling Tank
Open design with spring assisted hinged lid to be provided for easy access for leaning and visual inspection. The tank will be a cylindrical shape with a condensing unit underneath with a double stainless steel shell of AISI 304 in special ground finish 150 grit. The bottom of the tank is designed with a dimple evaporator. It is to be made from AISI 304 Stainless Steel using laser welding technology. The thickness of the inner shell be 2 mm and the outer shell shall be 1.5 mm

Insulation : The tank is insulated with free injected polyurethane foam min 40 kg.m3 without any imperfection with a thickness of 50mm as per ISO 5708 class 2A-II.

The tank is complete with the following accessories:

Agitator - Extra low-speed agitator with stainless steel shaft and specially designed blade are fabricated for easy rotation of milk even cooling motor will be provided for optimum sealing between agitator and tank.

Outlet - 1 No. tank outlet fitted with 1 No. Butterfly valve comes in standard 304 alloys and can accommodate tri-clamp sizes. Clamp connections have a plain ferrule, a clamp and a gasket for secure connections.

B) Refrigeration System
Mounted on a skid comprising of the following:
Hermetically sealed compressor complete with drive motor,

Condenser - Air cooled, screen protected compact condenser unit comprising of finned condenser coils in sereral rows.
One set evaporating coils was welded to the inside tank and pressed into a channelling plate of adequate size.

Refrigerant & Oil - The unit suppled complete with the first charge of the environment-friendly refrigerant and lubrication oil.

One Set - Refrigeration system controls field mounted comprising of a solenoid valve, L.P/H.P. cutout and sensor for digital temperature indicators.

C) Control Panel - Refrigeration control panel with milk tank control panel shall be fabricated of 1.2 mm thick Stainless steel AISI304 sheet in design will have temperature display & control panel with attached switch for on/off etc. The control panel is given in mounted execution and is pre-wired to terminal connections.
Request
Callback
Yes! I am Interested

Bulk Milk Cooler BMC 200 Ltr

Bulk Milk Cooler BMC 200 Ltr
  • Bulk Milk Cooler BMC 200 Ltr
  • Bulk Milk Cooler BMC 200 Ltr
  • Bulk Milk Cooler BMC 200 Ltr
Get Best Quote
Approx. Price: Rs 1.2 Lakh / PieceGet Latest Price
Product Brochure

Product Details:

Capacity200 Litre
Storage MaterialMilk
Tank OrientationVertcal
MaterialStainless Steel
Steel GradeSS304
Material GradeSS 304
BrandHT
Frequency50 Hz
PhaseSingle Phase
Voltage220
Orientation TypeCylindrical
ShapeVertical
MOCStainless Steel AISI304
Make of CompressorEmerson Copeland
Agitator power60 watts
Power SupplySingle-phase 220 Volts
Thickness of insulation50 - 60mm Puff insulation
Model of CompressorKCJ 511
Gross Capacity220 Litres
Shape & OrientationVertical,Cylindrical
Cleaning in place (CIP)Manual
CondenserAir - Cooled
Compressor1.0 Ton / 1.0 KW
MakeHindustan Thermostatics
Country of OriginMade in India

  • Capacity – 200 Litres
  • Technology – Direct expansion cooling tank (Open type round shape)
  • Insulation – Factory injected polyurethane foam of 50mm.
  • Condensing unit – Hermetically sealed type with R22/R404 refrigerant gas.

FUNCTION: The Bulk Cooling Unit will be used to cool raw milk from the ambient temperature of 35 deg. to 4 deg. C within the specified time as laid down by us ISO 5708 Class 2A-II Standards. Two Milking design system has been configured such that volume of each milking is as under :

  • Milking in the Morning – 50%
  • Milking in the Evening – 50%

Maximum Cooling Time :

  • First Milking : 3.0 hr. from 35 Deg. to 4 Deg. Celsius
  • Second Milking : 1.5 hr. from 10 Deg. to 4 Deg. Celsius
A) Milk Cooling Tank
Open design with spring assisted hinged lid to be provided for easy access for leaning and visual inspection. The tank will be a cylindrical shape with a condensing unit underneath with a double stainless steel shell of AISI 304 in special ground finish 150 grit. The bottom of the tank is designed with a dimple evaporator. It is to be made from AISI 304 Stainless Steel using laser welding technology. The thickness of the inner shell be 2 mm and the outer shell shall be 1.5 mm

Insulation : The tank is insulated with free injected polyurethane foam min 40 kg.m3 without any imperfection with a thickness of 50mm as per ISO 5708 class 2A-II.

The tank is complete with the following accessories:

Agitator - Extra low-speed agitator with stainless steel shaft and specially designed blade are fabricated for easy rotation of milk even cooling motor will be provided for optimum sealing between agitator and tank.

Outlet - 1 No. tank outlet fitted with 1 No. Butterfly valve comes in standard 304 alloys and can accommodate tri-clamp sizes. Clamp connections have a plain ferrule, a clamp and a gasket for secure connections.

B) Refrigeration System
Mounted on a skid comprising of the following:
Hermetically sealed compressor complete with drive motor,

Condenser - Air cooled, screen protected compact condenser unit comprising of finned condenser coils in sereral rows.
One set evaporating coils was welded to the inside tank and pressed into a channelling plate of adequate size.

Refrigerant & Oil - The unit suppled complete with the first charge of the environment-friendly refrigerant and lubrication oil.

One Set - Refrigeration system controls field mounted comprising of a solenoid valve, L.P/H.P. cutout and sensor for digital temperature indicators.

C) Control Panel - Refrigeration control panel with milk tank control panel shall be fabricated of 1.2 mm thick Stainless steel AISI304 sheet in design will have temperature display & control panel with attached switch for on/off etc. The control panel is given in mounted execution and is pre-wired to terminal connections.
Request
Callback
Yes! I am Interested

Bulk Milk Cooler BMC 1000 Ltr

Bulk Milk Cooler BMC 1000 Ltr
  • Bulk Milk Cooler BMC 1000 Ltr
  • Bulk Milk Cooler BMC 1000 Ltr
  • Bulk Milk Cooler BMC 1000 Ltr
  • Bulk Milk Cooler BMC 1000 Ltr
  • Bulk Milk Cooler BMC 1000 Ltr
  • Bulk Milk Cooler BMC 1000 Ltr
Get Best Quote
Approx. Price: Rs 2.5 Lakh / PieceGet Latest Price
Product Brochure

Product Details:

Capacity1000 Litre
Storage MaterialMilk
Tank OrientationHorizontal
MaterialStainless Steel
BrandHT
No. of CompressorOne
Compressor2.5 Ton / 10.0 Amps
Make of CompressorEmerson Copeland
Receiver Size & Capacity6 L
Thermostatics expansion valve capacityOriface - 5
Condenser Fan180/0.4 Amps
TypeDirect expansion open type
CondenserAir Cooled,Finned Tube Type
RPM of the Agitator (s) Approx.25-28 RPM
Thermostatic Expansion valve makeDanfoss / Alco
Shape & OrientationOpen Type Horizontal / Semi Cylindrical
Type of CompressorHermetically sealed reciprocating
Type of RefrigerantFreon - R 22 / Eco Friendly
Thermostatics expansion valve sizeDanfoss Tex - 2T with Equaliser
No. of FansOne
Type of InsulationBy injection of high density 40 kg/cu CFC free PUF without any imperfection and hygroscopicity
Thickness of insulation50 mm in walls & 90 mm above evaporator
Gross Capacity1100 Litre
Thermostatics Expansion ValveDanfoss Tex - 2T with Equaliser
Agitator70 Watt / 0.4 Amps
The material used for constructionAISI 304
CIP FacilityManual with long handle brush
Model of CompressorCR 36
Size (Nominal HP) of compressor2.5 Ton
Number of AgitatorOne
Size of Condenser21" x 24" - 3 Row
Power SupplySingle / Three-Phase
The thickness of outer shells1.5 mm
The thickness of inner shells2.0 mm
Connected LoadWatts / Amps

Bulk milk cooler tank capacity of 1000 Litres is a direct expansion cooling tank (Open Type Horizontal Semi Cylindrical Shape) that has large opening lids for easy access and rounded internal corners to facilitate thorough cleaning tank Insulation is provided by factory injected Polyurethane foam (PUF) of 50mm, All Control System Integral Condensing units hermetic Type with R22 Refrigerant having features of:

  • Low Running Cost
  • High Standard of Milk Hygiene
  • Reduced Electricity Consumption
  • The Agitator on/off
  • Cooling on/off
  • Digital Temperature Display
  • 35° C to 4° C within 3 hours for 1st milking i.e 50% of tank capacity for 2nd milking 10-12° C to 4° C of the total capacity of the tank in 1.5 hrs.
  • Condensing unit hermetic type single/three-phase 50 Hz supply. 
Function
The Bulk Cooling Units will be used to cool raw milk at the village level milk collection centre from the ambient temperature to 4° C within the specified time as laid down by ISO 5708 Class 2A-II Standards.

Two Milking Design System has been configured such that the volume of each milking is as under

Milking in the Morning : 50% (500 Ltrs)
Milking in the Evening : 50% (500 Ltrs)

Please note minimum milk should be 250 Ltrs for proper functioning of BMC.

Design Parameter
The ambient temperature to be considered for design shall be 38° C and safe operating temperature shall be 43° C

A) Milk Cooling Tank 
Open design with spring assisted hinged lid to be provided for easy access for cleaning and visual inspection. The tank will be a cylindrical shape with a condensing unit underneath with a double stainless steel shell of AISI 304 in special ground finish 150 grit. The bottom of the tank is designed with a dimple evaporator. It is to be made from AISI 304 Stainless Steel using laser welding technology. The thickness of the inner shell be 2 mm and the outer shell shall be 1.5 mm

Insulation
The tank is insulated with CFC Free injected polyurethane foam min 40 kg/m3 without any imperfection or hygroscopicity with a thickness of 50mm.

The efficiency of the insulation
Milk at 4° C shall not exceed 1° C in 4 hours when the rated volume is allowed to stand as per ISO at 50° ambient.

Accessories 

Agitator - Extra low-speed agitator with stainless steel shaft SS sleeved up to the drive, which is geared motor will be provided for optimum sealing between agitator and tank.

Outlet - 1 unit tank outlet fitted with 1 unit Butterfly valve.

B) Refrigeration System
Mounted on a skid comprising of the following: Hermetically sealed compressor complete with drive motor

Condenser - Air Cooled, screen-protected compact condenser unit comprising of finned condenser coils in several rows. Condenser fans of reputed make are fitted for the duty. One set of evaporating coils was welded to the inside tank and pressed into a channelling plate of adequate size.

Refrigerant & Oil - The unit is supplied complete with the first charge of the environment-friendly refrigerant and lubrication oil.

Oneset - Refrigeration system controls field mounted consisting of the solenoid valve, L.P / H.P. cutout and sensor for digital temperature indicators.

C) Control Panel
Refrigeration control panel with milk tank control panel shall be fabricated of 1.2 mm thick mild steel sheet in dust and vermin proof design will have temperature Display & control, switch gears etc. The control panel is given in mounted execution and is pre-wired to terminal connections.


Request
Callback
Yes! I am Interested

Bulk Milk Cooler BMC (Vertical) 500 Ltr

Bulk Milk Cooler BMC (Vertical) 500 Ltr
  • Bulk Milk Cooler BMC (Vertical) 500 Ltr
  • Bulk Milk Cooler BMC (Vertical) 500 Ltr
  • Bulk Milk Cooler BMC (Vertical) 500 Ltr
  • Bulk Milk Cooler BMC (Vertical) 500 Ltr
  • Bulk Milk Cooler BMC (Vertical) 500 Ltr
  • Bulk Milk Cooler BMC (Vertical) 500 Ltr
  • Bulk Milk Cooler BMC (Vertical) 500 Ltr
Get Best Quote
Approx. Price: Rs 1.5 Lakh / PieceGet Latest Price
Product Brochure

Product Details:

Capacity500 litres
Storage MaterialMilk
Tank OrientationVertcal
MaterialStainless Steel
Steel GradeSS304
Material GradeSS 304
BrandHT
PhaseSingle Phase
PowerSingle-Phase 220 Volts
Orientation TypeCylindrical
ShapeVertical
Gross Capacity550
CIP FacilityManual
Type of InsulationBy injection of high density 40 kg/cu CFC free PUF without any imperfection and hygroscopicity
Compressor1.5 Ton
Shape & OrientationOpen Type Cylindrical
The thickness of outer shells1.6 mm
RPM of the Agitator (s) Approx.28-30 RPM
Power SupplySingle / Three-Phase
No. of CompressorOne
Connected LoadWatts / Amps
Size (Nominal HP) of Compressor1.5 Ton
Agitator60 Watt
CondenserAir Cooled,Finned Tube Type
Type of RefrigerantFreon R-22 / Eco Friendly
Make of CompressorEmerson Copeland / Danfoss
Type of CompressorHermetically sealed reciprocating
No. of FansOne
The material used for constructionAISI 304
The thickness of inner shells2.0 mm
Number of AgitatorOne
Country of OriginMade in India

  • Capacity – 500 Litres
  • Technology – Direct expansion cooling tank (Open type round shape)
  • Insulation – Factory injected polyurethane foam of 50mm.
  • Condensing unit – Hermetically sealed type with R22/R404 refrigerant gas.

FUNCTION: The Bulk Cooling Unit will be used to cool raw milk from the ambient temperature of 35 deg. to 4 deg. C within the specified time as laid down by us ISO 5708 Class 2A-II Standards. Two Milking design system has been configured such that volume of each milking is as under :

  • Milking in the Morning – 50%
  • Milking in the Evening – 50%

Maximum Cooling Time :

  • First Milking : 3.0 hr. from 35 Deg. to 4 Deg. Celsius
  • Second Milking : 1.5 hr. from 10 Deg. to 4 Deg. Celsius
A) Milk Cooling Tank
Open design with spring assisted hinged lid to be provided for easy access for leaning and visual inspection. The tank will be a cylindrical shape with a condensing unit underneath with a double stainless steel shell of AISI 304 in special ground finish 150 grit. The bottom of the tank is designed with a dimple evaporator. It is to be made from AISI 304 Stainless Steel using laser welding technology. The thickness of the inner shell be 2 mm and the outer shell shall be 1.5 mm

Insulation : The tank is insulated with free injected polyurethane foam min 40 kg.m3 without any imperfection with a thickness of 50mm as per ISO 5708 class 2A-II.

The tank is complete with the following accessories:

Agitator - Extra low-speed agitator with stainless steel shaft and specially designed blade are fabricated for easy rotation of milk even cooling motor will be provided for optimum sealing between agitator and tank.

Outlet - 1 No. tank outlet fitted with 1 No. Butterfly valve comes in standard 304 alloys and can accommodate tri-clamp sizes. Clamp connections have a plain ferrule, a clamp and a gasket for secure connections.

B) Refrigeration System
Mounted on a skid comprising of the following:
Hermetically sealed compressor complete with drive motor,

Condenser - Air cooled, screen protected compact condenser unit comprising of finned condenser coils in sereral rows.
One set evaporating coils was welded to the inside tank and pressed into a channelling plate of adequate size.

Refrigerant & Oil - The unit suppled complete with the first charge of the environment-friendly refrigerant and lubrication oil.

One Set - Refrigeration system controls field mounted comprising of a solenoid valve, L.P/H.P. cutout and sensor for digital temperature indicators.

C) Control Panel - Refrigeration control panel with milk tank control panel shall be fabricated of 1.2 mm thick Stainless steel AISI304 sheet in design will have temperature display & control panel with attached switch for on/off etc. The control panel is given in mounted execution and is pre-wired to terminal connections.
Request
Callback
Yes! I am Interested

Bulk Milk Cooler BMC 2000 Ltr

Bulk Milk Cooler BMC 2000 Ltr
  • Bulk Milk Cooler BMC 2000 Ltr
  • Bulk Milk Cooler BMC 2000 Ltr
  • Bulk Milk Cooler BMC 2000 Ltr
  • Bulk Milk Cooler BMC 2000 Ltr
Get Best Quote
Approx. Price: Rs 3.7 Lakh / PieceGet Latest Price
Product Brochure

Product Details:

CapacityUp to 250 litres
Storage MaterialMilk
Tank OrientationHorizontal
Steel GradeSS304
MaterialStainless Steel
Material GradeSS 304
BrandHT
Shape & OrientationOpen Type Horizontal/Semi Cylindrical
Facility to measure milk volumeSS Calibrated Dipstick with value chart
TypeDirect expansion open type
RPM of the Agitator (s) Approx.25-28 RPM
Overall Dimensions and weight2400 x 1500 x 1500 mm
The thickness of inner shells2.0 mm
The thickness of outer shells1.5 mm
Number of AgitatorOne
CIP FacilityManual with long handle brush
Type of InsulationBy injection in situ of High Density 40 kg/cu.m,CFC free PUF without any imperfection and hygroscop
Thickness of insulation50 mm in walls & 90 mm above evaporator
The material used for constructionAISI 304

Bulk milk cooler tank capacity of 2000 Litres is a direct expansion cooling tank (Open Type Horizontal Semi Cylindrical Shape) that has large opening lids for easy access and rounded internal corners to facilitate thorough cleaning tank Insulation is provided by factory injected Polyurethane foam (PUF) of 50mm, All Control System Integral Condensing units hermetic Type with R22 Refrigerant having features of:

  • Low Running Cost
  • High Standard of Milk Hygiene
  • Reduced Electricity Consumption
  • The Agitator on/off
  • Cooling on/off
  • Digital Temperature Display
  • 35° C to 4° C within 3 hours for 1st milking i.e 50% of tank capacity for 2nd milking 10-12° C to 4° C of the total capacity of the tank in 1.5 hrs.
  • Condensing unit hermetic type single/three-phase 50 Hz supply. 
Function
The Bulk Cooling Units will be used to cool raw milk at the village level milk collection centre from the ambient temperature to 4° C within the specified time as laid down by ISO 5708 Class 2A-II Standards.

Two Milking Design System has been configured such that the volume of each milking is as under

Milking in the Morning : 50% (1000 Ltrs)
Milking in the Evening : 50% (1000 Ltrs)

Please note minimum milk should be 500 Ltrs for proper functioning of BMC.

Design Parameter
The ambient temperature to be considered for design shall be 38° C and safe operating temperature shall be 43° C

A) Milk Cooling Tank 
Open design with spring assisted hinged lid to be provided for easy access for cleaning and visual inspection. The tank will be a cylindrical shape with a condensing unit underneath with a double stainless steel shell of AISI 304 in special ground finish 150 grit. The bottom of the tank is designed with a dimple evaporator. It is to be made from AISI 304 Stainless Steel using laser welding technology. The thickness of the inner shell be 2 mm and the outer shell shall be 1.5 mm

Insulation
The tank is insulated with CFC Free injected polyurethane foam min 40 kg/m3 without any imperfection or hygroscopicity with a thickness of 50mm.

The efficiency of the insulation
Milk at 4° C shall not exceed 1° C in 4 hours when the rated volume is allowed to stand as per ISO at 50° ambient.

Accessories 

Agitator - Extra low-speed agitator with stainless steel shaft SS sleeved up to the drive, which is geared motor will be provided for optimum sealing between agitator and tank.

Outlet - 1 unit tank outlet fitted with 1 unit Butterfly valve.

B) Refrigeration System
Mounted on a skid comprising of the following: Hermetically sealed compressor complete with drive motor

Condenser - Air Cooled, screen-protected compact condenser unit comprising of finned condenser coils in several rows. Condenser fans of reputed make are fitted for the duty. One set of evaporating coils was welded to the inside tank and pressed into a channelling plate of adequate size.

Refrigerant & Oil - The unit is supplied complete with the first charge of the environment-friendly refrigerant and lubrication oil.

Oneset - Refrigeration system controls field mounted consisting of the solenoid valve, L.P / H.P. cutout and sensor for digital temperature indicators.

C) Control Panel
Refrigeration control panel with milk tank control panel shall be fabricated of 1.2 mm thick mild steel sheet in dust and vermin proof design will have temperature Display & control, switch gears etc. The control panel is given in mounted execution and is pre-wired to terminal connections.
Request
Callback
Yes! I am Interested

Bulk Milk Cooling 3000 Litre

Bulk Milk Cooling 3000 Litre
  • Bulk Milk Cooling 3000 Litre
  • Bulk Milk Cooling 3000 Litre
Get Best Quote
Approx. Price: Rs 5 Lakh / PieceGet Latest Price
Product Brochure

Product Details:

Capacity3000 Litre
Storage MaterialMilk
Steel GradeSS304
MaterialStainless Steel
Material GradeSS 304
BrandHT
The capacity of Condenser kcal / hr2 x 10152 at 7.2 Degree C 2 x 8586 at 0 Degree C
Gross Capacity3300 Litre
Model of CompressorCR-42 x 2
Size (Nominal HP) of Compressor2 x 4.5 HP
Size of Condenser24" x 42" - 4 Row
Facility to measure milk volumeSS Calibrated Dipstick with value chart
Number of AgitatorOne
Thermostatics Expansion Valve capacityORIFICE - 5
The material used for constructionAISI 304
Thermostatic Expansion ValveDANFOSS TEX-2T WITH EQUALISER
Connected LoadWatts/Amps
Power SupplyThree-Phase
Type of insulationBy injection in situ of high density 40 kg/cu CFC free PUF without any imperfection and hygroscopici
Type of RefrigerantFreon - R 22 / Eco Friendly
CIP FacilityCIP with Spray Ball
Model of CondenserGES 72
Type of CompressorHermetically sealed reciprocating
Condenser Fan180/0.4 Amp x 4
Make of CompressorEmerson Copeland
The thickness of outer shells1.5 mm
The thickness of inner shells2.0 mm
Make of CondenserLLOYD / COIL INDIA
Agitator120 watts / 0.4 Amps
Thickness of insulation50 mm in walls & 90 mm above evaporator
Thermostatic Expansion Valve Size1/4 / 3/8
Compressor2 x 5 Ton / 10.8 Amps
CondenserAir Cooled, Finned Tube Type
Maximum/Surge current drawm by the Compressor(s)2 x 4 KW / 10.8 Amp
Thermostatic Expansion Valve MakeDANFOSS / ALCO
No. of CompressorTwo
RPM of the Agitator (s) Approx.25-28 RPM
No. of FansFour

Bulk Milk Cooer 3000 Litre capacity enclosed type design with automatic cooling control unit with digital display control panel has rounded internal corners to facilitate thorough cleaning tank insulation is provided by factory injected polyurethane foam of 50 mm. The integral condensing units is hermetic type with R22 refrigerant.

  • Low Running Cost
  • High Standard of Milk Hygiene
  • Reduced Electricity Consumption
  • The Agitator on/off switch
  • Cooling on/off switch
  • Digital Temperature Display
  • Condensing Unit Hermetic 380-440 volts three phase 50 Hz power supply
  • Design and fabricated by Stainless Steel SS 304
  • Double Condensing Unit Hermetic Type
FUNCTION: The Bulk Cooling Unit will be used to cool raw milk from the ambient temperature of 35° to 4° C within the specified time as laid down by us ISO 5708 Class 2A-II Standards.
Two Milking design system has been configured such that volume of each milking is as under :
  • Milking in the Morning – 50% (1500 Ltrs)
  • Milking in the Evening – 50% (1500 Ltrs)
Please note minimum milk should be 750 Ltrs for proper functioning of BMC.

Maximum Cooling Time :

  • First Milking : 3.0 hr. from 35° to 4° Celsius
  • Second Milking : 1.5 hr. from 10° to 4° Celsius
Request
Callback
Yes! I am Interested

Bulk Milk Cooler BMC 300 Ltr

Bulk Milk Cooler BMC 300 Ltr
  • Bulk Milk Cooler BMC 300 Ltr
  • Bulk Milk Cooler BMC 300 Ltr
Get Best Quote
Approx. Price: Rs 1.4 Lakh / PieceGet Latest Price
Product Brochure

Product Details:

Storage MaterialMilk
Tank OrientationVertcal
Steel GradeSS304
MaterialStainless Steel
Material GradeSS 304
BrandHT
Frequency50 Hz
PhaseSingle Phase
PowerSingle-Phase 220 Volts
Voltage220
Orientation TypeCylindrical
ShapeVertical
Make of CompressorEmerson Copeland
MakeHindustan Thermostatics
Power SupplySingle-phase 220 Volts
Model of CompressorKCJ 511
CondenserAir - Cooled
Cleaning in place (CIP)Manual
Thickness of insulation50 - 60mm Puff insulation
Gross Capacity330 Litre
Compressor1.0 Ton / 1.0 KW Per Hour
Agitator power60 Watts
MOCStainless Steel AISI304
Shape & OrientationVertical,Cylindrical
Country of OriginMade in India

  • Capacity – 300 Litres
  • Technology – Direct expansion cooling tank (Open type round shape)
  • Insulation – Factory injected polyurethane foam of 50mm.
  • Condensing unit – Hermetically sealed type with R22/R404 refrigerant gas.

FUNCTION: The Bulk Cooling Unit will be used to cool raw milk from the ambient temperature of 35 deg. to 4 deg. C within the specified time as laid down by us ISO 5708 Class 2A-II Standards. Two Milking design system has been configured such that volume of each milking is as under :

  • Milking in the Morning – 50%
  • Milking in the Evening – 50%

Maximum Cooling Time :

  • First Milking : 3.0 hr. from 35 Deg. to 4 Deg. Celsius
  • Second Milking : 1.5 hr. from 10 Deg. to 4 Deg. Celsius
A) Milk Cooling Tank
Open design with spring assisted hinged lid to be provided for easy access for leaning and visual inspection. The tank will be a cylindrical shape with a condensing unit underneath with a double stainless steel shell of AISI 304 in special ground finish 150 grit. The bottom of the tank is designed with a dimple evaporator. It is to be made from AISI 304 Stainless Steel using laser welding technology. The thickness of the inner shell be 2 mm and the outer shell shall be 1.5 mm

Insulation : The tank is insulated with free injected polyurethane foam min 40 kg.m3 without any imperfection with a thickness of 50mm as per ISO 5708 class 2A-II.

The tank is complete with the following accessories:

Agitator - Extra low-speed agitator with stainless steel shaft and specially designed blade are fabricated for easy rotation of milk even cooling motor will be provided for optimum sealing between agitator and tank.

Outlet - 1 No. tank outlet fitted with 1 No. Butterfly valve comes in standard 304 alloys and can accommodate tri-clamp sizes. Clamp connections have a plain ferrule, a clamp and a gasket for secure connections.

B) Refrigeration System
Mounted on a skid comprising of the following:
Hermetically sealed compressor complete with drive motor,

Condenser - Air cooled, screen protected compact condenser unit comprising of finned condenser coils in sereral rows.
One set evaporating coils was welded to the inside tank and pressed into a channelling plate of adequate size.

Refrigerant & Oil - The unit suppled complete with the first charge of the environment-friendly refrigerant and lubrication oil.

One Set - Refrigeration system controls field mounted comprising of a solenoid valve, L.P/H.P. cutout and sensor for digital temperature indicators.

C) Control Panel - Refrigeration control panel with milk tank control panel shall be fabricated of 1.2 mm thick Stainless steel AISI304 sheet in design will have temperature display & control panel with attached switch for on/off etc. The control panel is given in mounted execution and is pre-wired to terminal connections.
Request
Callback
Yes! I am Interested

Bulk Milk Cooler BMC 500 Ltr

Bulk Milk Cooler BMC 500 Ltr
  • Bulk Milk Cooler BMC 500 Ltr
Get Best Quote
Approx. Price: Rs 1.7 Lakh / PieceGet Latest Price
Product Brochure

Product Details:

Capacity500 Litre
Tank OrientationHorizontal
MaterialStainless Steel
BrandHT
The thickness of inner shells2.0
TypeDirect expansion open type
Size (Nominal HP) of compressor1.0 Ton
The material used for constructionAISI 304
Type of InsulationBy injection of high density 40 kg/cu CFC free PUF without any imperfection and hygroscopicity
RPM of the Agitator (s) Approx.28-30 RPM
CondenserAir Cooled,Finned Tube Row
Size of Condenser21" x 24" - 3 Row
No. of FanOne
Power SupplySingle / Three-Phase
Overall Dimensions and weight2388 x 980 x 1100
Thickness of insulation50 mm in walls & 90 mm above evaporator
No. of CompressorOne
Condenser Fan180 / 0.4 Amps
Gross Capacity550 Litre
Shape & OrientationOpen Type Horizontal / Rectagular
Make of compressorEmerson Copeland / Danfoss
Connected LoadWatts / Amps
The thickness of outer shells1.6 mm
Number of AgitatorOne
Compressor1.0 Ton
CIP FacilityManual with long handle brush
Agitator70 Watt
Type of RefrigerantFreon R-22 / Eco Friendly
Type of compressorhermetically sealed reciprocating

  • Capacity – 500 Litres
  • Technology – Direct expansion cooling tank (Open type round shape)
  • Insulation – Factory injected polyurethane foam of 50mm.
  • Condensing unit – Hermetically sealed type with R22/R404 refrigerant gas.

FUNCTION: The Bulk Cooling Unit will be used to cool raw milk from the ambient temperature of 35 deg. to 4 deg. C within the specified time as laid down by us ISO 5708 Class 2A-II Standards. Two Milking design system has been configured such that volume of each milking is as under :

  • Milking in the Morning – 50%
  • Milking in the Evening – 50%

Maximum Cooling Time :

  • First Milking : 3.0 hr. from 35 Deg. to 4 Deg. Celsius
  • Second Milking : 1.5 hr. from 10 Deg. to 4 Deg. Celsius
A) Milk Cooling Tank
Open design with spring assisted hinged lid to be provided for easy access for leaning and visual inspection. The tank will be a cylindrical shape with a condensing unit underneath with a double stainless steel shell of AISI 304 in special ground finish 150 grit. The bottom of the tank is designed with a dimple evaporator. It is to be made from AISI 304 Stainless Steel using laser welding technology. The thickness of the inner shell be 2 mm and the outer shell shall be 1.5 mm

Insulation : The tank is insulated with free injected polyurethane foam min 40 kg.m3 without any imperfection with a thickness of 50mm as per ISO 5708 class 2A-II.

The tank is complete with the following accessories:

Agitator - Extra low-speed agitator with stainless steel shaft and specially designed blade are fabricated for easy rotation of milk even cooling motor will be provided for optimum sealing between agitator and tank.

Outlet - 1 No. tank outlet fitted with 1 No. Butterfly valve comes in standard 304 alloys and can accommodate tri-clamp sizes. Clamp connections have a plain ferrule, a clamp and a gasket for secure connections.

B) Refrigeration System
Mounted on a skid comprising of the following:
Hermetically sealed compressor complete with drive motor,

Condenser - Air cooled, screen protected compact condenser unit comprising of finned condenser coils in sereral rows.
One set evaporating coils was welded to the inside tank and pressed into a channelling plate of adequate size.

Refrigerant & Oil - The unit suppled complete with the first charge of the environment-friendly refrigerant and lubrication oil.

One Set - Refrigeration system controls field mounted comprising of a solenoid valve, L.P/H.P. cutout and sensor for digital temperature indicators.

C) Control Panel - Refrigeration control panel with milk tank control panel shall be fabricated of 1.2 mm thick Stainless steel AISI304 sheet in design will have temperature display & control panel with attached switch for on/off etc. The control panel is given in mounted execution and is pre-wired to terminal connections.
Request
Callback
Yes! I am Interested
X

Product Videos

Watch More Videos

Explore More Products

View All Products




Reach Us
Sanyam Jain (General Manager)
Hindustan Thermostatics
5, HSIIDC Industrial Estate
Industrial Area Phase 2, Ambala - 133006, Haryana, India
Get Directions


Call Us


Send E-mail